bizhub c252 c-fe07

[alsi5]

Hi, i've recently had an issue with bizhub c252. Sometimes when i turn on the machine i've get error code c-fe07 and only reboot helps. What this error means?

Regards
alsi5

[JustManuals]

Re: bizhub c252 c-fe07

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

[SmellsHot]

Re: bizhub c252 c-fe07

CFE07 ASIC10 Timeout Number of DMA under operation and
transfer completion line

Problematic parts: MFP Control Board
(PWB-MFP)

If it persists swap out the MFP board

[alsi5]

Re: bizhub c252 c-fe07

There is no different solution? MFP may cost a little much...

[Albonline]

Re: bizhub c252 c-fe07

There is no different solution? MFP may cost a little much...

try reflashing to the latest firmware levels . there was a problem with early fw

[alsi5]

Re: bizhub c252 c-fe07

Reflashing firmware didn't help. I've done it earlier...