[CQ] Bizhub 6501 goasting image

[susang]

I am having a problem with ghosting in all four colors. Have three new dev units and drums black has not been changed and new caronias any ideas?

[eifling]

Re: Bizhub 6501 goasting image

Where exactly is it ghosting? lead edge, tail? The entire sheet? What kind and gsm or stock? Maybe you could post a pic.

[susang]

Re: Bizhub 6501 ghosting image

I have tried both #80lb cover which is what the job runs on and also #24lb Navagator. I am attaching a couple of pics to show you.

[HoonBoy]

Re: Bizhub 6501 goasting image

Would search it in transferbelt...

[JustManuals]

Re: Bizhub 6501 goasting image

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

[smokeetr]

Check drums and make sure you took the screws out of the cleaning blade

[susang]

Re: Bizhub 6501 goasting image

Would search it in transferbelt...

Service was in today and changed everything to do with transfer no luck. They have escalated it to a service person further up the chain

[susang]

Re: Bizhub 6501 goasting image

Check drums and make sure you took the screws out of the cleaning blade

They are coming back in on thursday will have service check

[kalindd]

Re: Bizhub 6501 goasting image

This looks like cyan dev. unit is failing.
This has nothing to do with transfer belt.
You can try with adjusting Covered Margin Fine Adj. (Process Fine Adjustment) set it -5 and see if there is any luck.

[susang]

Re: Bizhub 6501 goasting image

This looks like cyan dev. unit is failing.
This has nothing to do with transfer belt.
You can try with adjusting Covered Margin Fine Adj. (Process Fine Adjustment) set it -5 and see if there is any luck.

Problem is it is doing it on all four colors