bizhub 423 with a fs 527 have a c1183 code

[TheOwl]

Re: bizhub 423 with a fs 527 have a c1183 code

[Product Name]	bizhub C220 bizhub C280 bizhub C360 bizhub C452
[Option]	FS-527
[Subject]	FS-527, C1183
[Description]

C1183 when removing copies from the main exit tray.

[TR] [TD="class: DETAIL_TAD_CAPTION, width: 18%, align: right"][Solution]

The lever of the original actuator 2 was too short by 1.6mm. The modified actuator is 1.6mm longer. Please order the modified actuator (A0HR897300) and replace it. note: The partnumber is the same as the old type. From Serial No.: A0HRWY1016166 and onwards. (16th November, 2009) the finishers have been modified from the factory. Please see attachment for identification of the "old" and "new" type of actuator. Note that the "old" type has a flat edge while the "new" type has a curved edge. Tip: It is advisable to put a smal (pen) mark on the label of the finisher serial number since it is difficult to see if the actuator has been modified.

[brent]

the machine just will not fire up. the manual says elevator sensors in the fs 527
the konica minolta website does not have any bulletins on this.
anybody have any thoughts on this code?

thanks
brent