[CQ] Procedure lighter or darker....with fiery

[dpepin]

Hi to all!i have an issue with a bizhub pro 5501, i would like to know if there's a procedure to adjust copy quality.i worked for 20 years on canon products and it seems more easy to get the prints lighter or darker in canon.so if you have a shortcut on how to print lighter or darker with the fiery X3. let me know.thanksDenis

[Mr Spock]

Re: Procedure lighter or darker....with fiery

When is has the last calibration been done? Is it lighter or darker then monitor or previous output? Have you tried the gamma corrections from the driver properties?

[dpepin]

Re: Procedure lighter or darker....with fiery

When is has the last calibration been done? Is it lighter or darker then monitor or previous output? Have you tried the gamma corrections from the driver properties?

The last calibration was this morning, the prints are always darker than the monitor, and i don't see any gamma adjust in the driver properties?
the driver is version 1.1a. do you have a more recent driver?

thanks
Denis

[Mita-Konica-Tech]

Re: Procedure lighter or darker....with fiery

I would first calibrate the monitor, before calibrating the Fiery....then as Mr Spock suggests then gamma corrections..

[1FRY1]

Re: Procedure lighter or darker....with fiery

Are the internal test prints ok,

If you want to adjust a the print setup create a profile in the colour setup on Command workstation.