KM 452

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • diamondian
    Technician
    • May 2009
    • 26
    #1

    KM 452

    Just switched on our KM452 after a little while with it idle and can't seem to get jobs across to it.

    Picking it up on appletalk and on USB, whenever i send a job to the machine the blue data light flashes but nothing comes across the the que's.

    Any ideas..
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: KM 452

      So you have the basic network connection. Is the machine displaying any error conditions that would prevent it from printing? Anything from Add Toner, to Load A4 Paper, to C1183, can prevent printing. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • diamondian
          Technician
          • May 2009
          • 26
          #3
          Re: KM 452

          No, its all good and ready to go..

          Just had a quick thought, tried putting the job on a USB stick, it beeps when inserted but nothing comes up on the screen.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22997
              #4
              Re: KM 452

              If you're a tech:

              You can re-load firmware.
              If that doesn't help, re-format the HDD, then reload movie data, and re-enter encryption code.

              If you're not a tech, please call one. These tasks are not as easy as they sound. Once I had all the addressbook entries re-entered and working there was three hours into it, and I sort-of knew what I was doing. =^..^=
              Last edited by blackcat4866; 10-14-2012, 09:19 PM.
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...