Scan to LDAP dpi is stuck at 100. Almost illegible. Changes only available for email, FTP,smb and control center
*Edit typo
*Edit typo
-
Last edited by JR2ALTA; 10-16-2012, 03:56 AM. -
Re: Heads up bizhub20 bug
Did you ever got scan>e-mail working on this gem? I never succeeded so customers are using scan>ftp which I prefer anyway.
Hans“ Sent from my Intel 80286 using MS-DOS 2.0
“
https://www.copytechnet.com/images/smilies/biggrin.png -
Re: Heads up bizhub20 bug
Funny you mention, I pray for email setups, I can never get "network"(smb) to work.
FTP is nice except if they are laptops static ip is a problem.
Bottom line,they are solid mfps but network diagnostics are a jokeComment
-
Re: Heads up bizhub20 bug
Does this help?:
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Heads up bizhub20 bug
Bizhub 20 and Bizhub C20 are two totally different animals.
The BH20 is a re-tagged Brother MFP.Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment