BH600 Second Side background

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JR2ALTA
    Service Manager

    Site Contributor
    1,000+ Posts
    • Feb 2010
    • 2030
    #1

    BH600 Second Side background

    Both sides clean on a simplex print.

    Duplex prints have background on second side only.

    Tried transfer unit.

    I will try HV board next.

    Voltage should adjust for the second side, so I am guessing there is something whacky going on.

    Has 1.5 million on it.

    Thanks in advance!
    Tags: None
    • kon
      Technician

      50+ Posts
      • Jan 2010
      • 55
      #2
      Re: BH600 Second Side background

      Originally posted by JR2ALTA
      Both sides clean on a simplex print.

      Duplex prints have background on second side only.

      Tried transfer unit.

      I will try HV board next.

      Voltage should adjust for the second side, so I am guessing there is something whacky going on.

      Has 1.5 million on it.

      Thanks in advance!
      Seen this happen when way over pm cycle. Also when adjustments are off most often Ld1 Ld2. This use to happen on the old 7255 all the time from a bad drum ground.

        Comment

        • JR2ALTA
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2010
          • 2030
          #3
          Re: BH600 Second Side background

          Originally posted by kon
          Seen this happen when way over pm cycle. Also when adjustments are off most often Ld1 Ld2. This use to happen on the old 7255 all the time from a bad drum ground.
          What did you do for the bad drum ground?

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838
              #4
              Re: BH600 Second Side background

              This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


              Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


              Paul@justmanuals.com

                Comment

                • JR2ALTA
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Feb 2010
                  • 2030
                  #5
                  Ld1 and ld2 thanks!

                    Comment

                    Previous template Next
                    Working...