konica minolta bh211 Machine powers on then cuts out!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RRodgers
    Service Manager

    1,000+ Posts
    • Jun 2009
    • 1947

    #16
    Re: konica minolta bh211 Machine powers on then cuts out!!

    Do you have a surge protector on it?
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

    Comment

    • Rudi
      Technician

      250+ Posts
      • Jun 2007
      • 251

      #17
      Re: konica minolta bh211 Machine powers on then cuts out!!

      If you take off the cover where the paper exits on and look right at the back you will find a small board with a relay on, try that if all else fails. BTW, i am referring to a B210, but i am sure it hasnt changed.

      Comment

      • mrwho
        Major Asshole!

        Site Contributor
        2,500+ Posts
        • Apr 2009
        • 4299

        #18
        Re: konica minolta bh211 Machine powers on then cuts out!!

        I'm here sitting and thinking if this isn't just a fuser problem, with the machine firing up the code even after it is released...
        ' "But the salesman said . . ." The salesman's an asshole!'
        Mascan42

        'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

        Ibid

        I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        Working...