Minolta 2010 cs pro Jamming @ Drum Unit

[sagar4]

I have a minolta 2010 CS Pro jamming on and off at the drum. Seems like static when it sticks to the drum. I can pull the paper right off. It seems like it clings to the drum. I was thinking about replacing the conrona assembly since the one on the copier looks worn out. Every thing else looks fine. Any suggestions. Thanks

[Darren King]

Re: Minolta 2010 cs pro Jamming @ Drum Unit

Possibly the registration clutch is failing. Clean or replace.
Darren

[mo0651]

Re: Minolta 2010 cs pro Jamming @ Drum Unit

IS THE SEPARATION WIRE IN THE UNIT BROKEN? Is the paper folded and jammed or just laying in there?

[sagar4]

Re: Minolta 2010 cs pro Jamming @ Drum Unit

IS THE SEPARATION WIRE IN THE UNIT BROKEN? Is the paper folded and jammed or just laying in there?

Wire is not broken. And yes it folds slightly and sticks to drum. Not all the time maybe evey 20th sheet or so. That's why I was thinking the corona assembly not functioning correctly and static builds static up.

[mo0651]

Re: Minolta 2010 cs pro Jamming @ Drum Unit

Nope sounds like clutch.

[sagar4]

Re: Minolta 2010 cs pro Jamming @ Drum Unit

Nope sounds like clutch.

Okay clutch it is. By any chance would you know the part number. Thanks

[Hansoon]

Re: Minolta 2010 cs pro Jamming @ Drum Unit

No need for new. Soak it and wash it out with brake cleaner than blow dry with compressed air. Works like new for sure.

Hans

[sagar4]

Re: Minolta 2010 cs pro Jamming @ Drum Unit

Okay thanks every one for the information.

[johnnymeg]

Re: Minolta 2010 cs pro Jamming @ Drum Unit

If that does not work try the solenoid for the drum pick off. It has been awhile but I remember that causing a similar issue.