Bizhub c353

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wtomes
    • May 2025

    #1

    [Misc] Bizhub c353

    I have Bizhub c353 control panel doesn't work at all no buttons work and touch panel doesn't.
    Start button light is red on.there is no error code on the display and display is normal. The touch panel will not let
    me reset the machine with the trouble reset procedure. This happen after a copier jam no one could find.
    can not get into maintence modes. Any ideals fellow techs
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: Bizhub c353

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • tervel12
      Technician

      50+ Posts
      • Dec 2008
      • 65

      #3
      Re: Bizhub c353

      The hard drive may have failed. Try disconnecting it and then see if you can get into service mode.

      Also, the firmware or NVRAM may have been corrupted. Try reflashing the MFP with the latest firmware.

      Comment

      • EarthKmTech
        Step aside, noob

        1,000+ Posts
        • May 2009
        • 2139

        #4
        Re: Bizhub c353

        try disconnecting the network cable.

        I HAVE had on 2 machines in 1 location such bizzar activity after lightning damage to their network switches, once they were replaced the machine were fine on the network again.

        Comment

        • wtomes

          #5
          Re: Bizhub c353

          Thanks guys I got it fixed it was a bad stick of ram.
          Warner Tomes

          Comment

          Working...