part number PRCB BIZHUB PRESS C7000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • batista_suprilaser

    #1

    part number PRCB BIZHUB PRESS C7000

    Gentlemen'm new here on the site and would like to get the part number of the board PRCB bizhub press c7000 because the code I have here is already outdated. Thank you all and I am available to all ...
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299

    #2
    Re: part number PRCB BIZHUB PRESS C7000

    Is the one you have this one?

    A1DUR70422 - Printer Control Unit

    Straight from the Parts Catalog from October 2012.

    Best regards!
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

    Comment

    • batista_suprilaser

      #3
      Re: part number PRCB BIZHUB PRESS C7000

      Originally posted by mrwho
      Is the one you have this one?

      A1DUR70422 - Printer Control Unit

      Straight from the Parts Catalog from October 2012.

      Best regards!
      Thanks for your help the part number I had was A1DU R704 00
      I'll try to find the part with the part number that you sent

      Comment

      • mrwho
        Major Asshole!

        Site Contributor
        2,500+ Posts
        • Apr 2009
        • 4299

        #4
        Re: part number PRCB BIZHUB PRESS C7000

        Originally posted by batista_suprilaser
        Thanks for your help the part number I had was A1DU R704 00
        I'll try to find the part with the part number that you sent
        You're welcome. Good luck!
        ' "But the salesman said . . ." The salesman's an asshole!'
        Mascan42

        'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

        Ibid

        I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        Working...