C353 transfer belt torn up

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mascan42
    Trusted Tech

    250+ Posts
    • Oct 2008
    • 480
    #1

    C353 transfer belt torn up

    I arrived at a C353 yesterday to find this on the transfer belt:

    20130220_143055.jpg

    The machine has only 83k copies on it, and is only 4 years old. It is a public-use machine, but it's in sight of the service counter, so it's unlikely to have been abused. Any idea what might cause such a disaster?
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22932
      #2
      Re: C353 transfer belt torn up

      I've seen this a few times after J30-03 jams, but only one "mustache". The multiple "mustaches" or piercings have to be misuse, since they do not line up with the belt separation claw. A sharp pointed tool would be required. Pen, pocket knife, awl, ice pick, ... your choice. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • EarthKmTech
          Step aside, noob

          1,000+ Posts
          • May 2009
          • 2139
          #3
          Re: C353 transfer belt torn up

          Something has gotten in there, possibly a staple or some other foreign material. I doubt the average generic dumbass would even know what a transfer belt was.

            Comment

            • habik
              Service Manager

              Site Contributor
              1,000+ Posts
              • Apr 2010
              • 2013
              #4
              Re: C353 transfer belt torn up

              A Label can cause this!! Print labels from Tray 1 or 2 only and for sure use LASER labels ONLY
              Last edited by habik; 02-21-2013, 02:38 PM. Reason: edit
              .OK Google! ... will I need Berrocca this morning?
              Firmwares HERE

                Comment

                • MAD0RAM
                  Technician

                  50+ Posts
                  • Oct 2012
                  • 82
                  #5
                  Re: C353 transfer belt torn up

                  That is the worst belt damage I have ever seen If you do figure out what caused that let us know.

                    Comment

                    • Imsdal
                      Trusted Tech

                      100+ Posts
                      • Aug 2009
                      • 111
                      #6

                        Comment

                        • Jnr
                          Junior Member
                          • Oct 2012
                          • 7
                          #7
                          Re: C353 transfer belt torn up

                          Looks like a few things are happening.

                          Could be an object rolling about.

                          Paper or labels going through

                            Comment

                            Previous template Next
                            Working...