Bizhub 65 hc loaded with yellow.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • maccenterpc
    Technician
    • Sep 2011
    • 40

    #1

    Bizhub 65 hc loaded with yellow.

    Have Bizhub 65HC overloaded with impressions of yellow.
    Very yellowish skin tones. Gamma, ICB, PRCB, IC304 were exchanged. Problem persists.


    Somebody help.


    Thank.
    Maccenter
  • Mick01
    Trusted Tech

    250+ Posts
    • Nov 2012
    • 362

    #2
    Re: Bizhub 65 hc loaded with yellow.

    You haven't mentioned if the following has been done
    Printer Gamma Offsett Adjustment for the screen being used
    Printer Gamma Sensor Adjustment for the screen being used
    Print Controller (IC304) calibrated on the stock you are trying to output.


    What do internal test prints look like? Try outputting test pattern 53 with CMY set to 100 and K set to 0. Check if output is dominant in yellow.

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: Bizhub 65 hc loaded with yellow.

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      • maccenterpc
        Technician
        • Sep 2011
        • 40

        #4
        Re: Bizhub 65 hc loaded with yellow.

        Sorry Mick01pela delay in replies.
        I have done printer gamma adjustment and printer gamma sensor adjustment. It's a C65hc and work with approximately 15 C6500. HC is the first.


        Print test 53 with 90 (0 ~ 255) CMY and 0 (0 ~ 255) K. The yellow predominated.


        Here in Brazil, we adopted DOT1 default. Printer Gamma Offset Adj. it is
        with C, M, Y & K ending between the two lines as service manual.


        The values ​​are:


        Y -12
        -7 M
        C +2
        +5 K


        based on PM200k kit, kit PM100K, Drum's and developer's all new.

        Thank for help!!!!!
        Maccenter

        Comment

        • Mick01
          Trusted Tech

          250+ Posts
          • Nov 2012
          • 362

          #5
          Re: Bizhub 65 hc loaded with yellow.

          Hi,
          Dot 1 is a good overall screen to use. However it can be dominant in yellow on cetain colours and files. Can i suggest that you set up Line 1 (gamma Offsett) and check the output. You should find this is a smoother screen.

          Comment

          • edmund
            Technician
            • Jul 2009
            • 29

            #6
            Re: Bizhub 65 hc loaded with yellow.

            I Agree With Mick01
            Please check dipsw 3 bit 0 as well that Changes you screening on dot1
            I found that the prints are very yellow when left on the old Dot1 screen type when the new screen type is implemented the colour (yellow) is changed (for the Better)

            Comment

            Working...