Bizhub 600 Always warming Up

[Steve0]

Hi Wasfil,

Thank you for your feed back post.

[Accentcp]

Can also happen if the counters are not cleared on PM.Messes up aging..

[douglasdouglasv]

Re: Bizhub 600 Always warming Up

I have multiple BZ 600's in the field. Please wait is always a dirty, or faulty toner control sensor board.

[MAD0RAM]

Re: Bizhub 600 Always warming Up

I have multiple BZ 600's in the field. Please wait is always a dirty, or faulty toner control sensor board.

X2

[EarthKmTech]

Re: Bizhub 600 Always warming Up

every single time i've had this issue its been dirty / failed drum sensors.

A clean machine is a happy machine (A tall order on these things if they're using shit paper)

[arsalan ali]

Re: PC Drum is be Replaced :

PC Drum, Starter tobe replace before, but the problem has be come after amoment (1minute) I do copy once in the screen "Warming Up Ready to Scan" I can do Scan, but the result print not going out.I have do : Drum Peculiarity - Auto MAx. Density Adj the result is Ok, then Auto gamma Adjst. (1dot) and (2dot) the result is Error 1, in the book that mean TCSB dirt,In other machine i have change/replace with New TCSB the problem is lose. (Ihave 2 machine with same problem)Thanks alot for All guys.....

the same thing happened with me in bizhub 600 after intalling new drum . machines goes on warming up for long time time

[chand226]

Re: PC Drum is be Replaced :

the same thing happened with me in bizhub 600 after intalling new drum . machines goes on warming up for long time time

i read all the threads
i have 200% correct formula for this copier (biz600/750/ di7210/7272)
contact me at chand226@gmail.com

[chand226]

Re: Bizhub 600 Always warming Up

Can also happen if the counters are not cleared on PM.Messes up aging..

no need of to change any firmware and drum.

i have 200% correct formula for this copier (biz600/750/ di7210/7272). no toner on corona, no warming up, pleasewait.
contact me at chand226@gmail.com

[CompyTech]

Then why don't you post it here? It's not like its some big trade secret any more. Those boxes are old as the hills, most people just want to fix the damned things and move on to the next call.

Sent from my Nexus 7 using Tapatalk

[chand226]

Re: Bizhub 600 Always warming Up

Then why don't you post it here? It's not like its some big trade secret any more. Those boxes are old as the hills, most people just want to fix the damned things and move on to the next call.

Sent from my Nexus 7 using Tapatalk

contact me.. i can solve this problem on best way

[Synaux]

Re: Bizhub 600 Always warming Up

contact me.. i can solve this problem on best way

If you are unable to post anything meaningful here, it is doubtful that you can assist anyone who may contact you. GTFO, Thanks!

[solidzdawg]

Re: Bizhub 600 Always warming Up

1.) Clean the sensors extremely well in the drum carriage.

2.) Ensure that the developer is not extremely worn.

3.)take front fusing unit plastic cover off, cheat front doors, and ensure lamps are running

[chand226]

Re: Bizhub 600 Always warming Up

If you are unable to post anything meaningful here, it is doubtful that you can assist anyone who may contact you. GTFO, Thanks!

its a big secret

[fredr]

Re: Bizhub 600 Always warming Up

Add developer powder to the dev