Morning all. I got a c360 with time adjustment was not successfully completed did the adjustment in service mode 1144 and in admin mode still no good. Any one any ideas?
-
-
Re: c360 time adjustment was not successfully completed
eventually found earlier post, all ok now. -
Re: c360 time adjustment was not successfully completed
For anyone who hasn't come across this, it just means that the customers time server data is no longer valid. You must just disable the automatic time adjustment:
Enter Time Server data or turn Off Time Adjusting Setting: go to web interface > administrator > login > admin password > OK > Maintenance tab > Date/Time Setting > Time Adjustment Setting > Time Adjustment Setting: OFF > OK
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment