kmbh bizhub c452: faint density on printing solid colors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kizi57
    Technician

    50+ Posts
    • Dec 2010
    • 69

    #1

    kmbh bizhub c452: faint density on printing solid colors

    please help on this matter...


    Rgds


    BARRY

    IMG_2954.JPG
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22934

    #2
    Re: kmbh bizhub c452: faint density on printing solid colors

    Have you run single color copies to isolate the affects of each color, i.e.: cyan, magenta, yellow, black?
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • kizi57
      Technician

      50+ Posts
      • Dec 2010
      • 69

      #3
      Re: kmbh bizhub c452: faint density on printing solid colors

      i have change fusing unit to other old one, this is sorted.

      is there a way i can fix this fusing unit to eliminate the problem?

      Rgds


      BARRY

      Originally posted by kizi57
      please help on this matter...


      Rgds


      BARRY

      [ATTACH=CONFIG]21925[/ATTACH]

      Comment

      • JustManuals
        Field Supervisor

        5,000+ Posts
        • Jan 2006
        • 9838

        #4
        Re: kmbh bizhub c452: faint density on printing solid colors

        This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


        Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


        Paul@justmanuals.com

        Comment

        Working...