J-3201 on C6500 PRO

[mzydekpl]

Re: J-3201 on C6500 PRO

Good morning, I'm new here.

Can any of you have a schematic where exactly is the sensor for

Replace PS13 (p/n 08AA 8551 2)

We ordered this sensor but at the customer's in the machine it looks different than this one.

Maybe some of you have machine diagrams with a part description?

[Synthohol]

Re: J-3201 on C6500 PRO

its on the exit section not the fuser

[methogod]

Re: J-3201 on C6500 PRO

have the pull the RU/finishers, left side panel, then the exit unit.

Not hard, just time consuming.

[mzydekpl]

Re: J-3201 on C6500 PRO

Stripped down the entire module, cleaned, replaced sensor.

Works fine till now.

Thank you so much for help

[Phil B.]

Re: J-3201 on C6500 PRO

Good morning, I'm new here.

Can any of you have a schematic where exactly is the sensor for

Replace PS13 (p/n 08AA 8551 2)

We ordered this sensor but at the customer's in the machine it looks different than this one.

Maybe some of you have machine diagrams with a part description?

this thread is YEARS OLD..start your own NEW THREAD!