J 3203

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • GeorgeK
    Technician
    • Sep 2008
    • 23
    #1

    [Jamming] J 3203

    Any idea much appreciated.
    Jams just after page is 'leaving' fuser assy (code J-3203)

    All fuser ball bearings have been replaced as well as 3 x fixing drive gear M22T (pn. A03U809311)

    Thanks in advance
    George
    TECHNICIAN noon. (tek~nish~uh n)
    A person who fixes the mistakes made by engineers.
    Tags: 203, 311, 320, 9311, code, drive, fixing, fuser, page, replaced
    • minimerlin
      Senior Tech

      Site Contributor
      500+ Posts
      • Nov 2007
      • 851
      #2
      Re: J 3203

      May I suggest that you let us know which model machine you have the problem with..saves me having to find out from your part number!
      Please do not PM me without asking first.

        Comment

        • GeorgeK
          Technician
          • Sep 2008
          • 23
          #3
          Re: J 3203

          Originally posted by minimerlin
          May I suggest that you let us know which model machine you have the problem with..saves me having to find out from your part number!
          really sorry.
          It's a Konica Minolta C6500 !!
          TECHNICIAN noon. (tek~nish~uh n)
          A person who fixes the mistakes made by engineers.

            Comment

            • GeorgeK
              Technician
              • Sep 2008
              • 23
              #4
              Re: J 3203 **solved**

              SOLVED

              Fuser exit sensor failure. Replaced.


              (The one on the chasis, not on the fuser assy !)
              TECHNICIAN noon. (tek~nish~uh n)
              A person who fixes the mistakes made by engineers.

                Comment

                Previous template Next
                Working...