Konica Minolta C203/C253 (Actual Olivetti MF200lite)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • The-Peanut
    Trusted Tech
    Site Contributor
    100+ Posts
    • Aug 2006
    • 192
    #1

    Konica Minolta C203/C253 (Actual Olivetti MF200lite)

    Hi

    I have had an awful time with a Olivetti MF201lite (Konica Minolta C203)

    We had the machine gun issue, in effect the machine had a blockage on the Magenta toner supply in the Conveyance tube. Yup! the whole machine has been stripped down to the frame just to reach the problem lol

    Anyhow we have a slight issue with Print Quality, please note that i have two machines in my workshop with the same problem
    It appears looking at the attached sample, to have darkened splodges in each of the colours, don't worry about the lines, its a fuser and transport belt issue, i have a few imaging units of each colour, that still show the same issue

    Anyone come across this before, thanks in advance

    Tags: belt, fuser, konica, konica minolta, minolta, print, quality, time, toner
    • ck1
      Trusted Tech

      250+ Posts
      • Apr 2008
      • 485
      #2
      Re: Konica Minolta C203/C253 (Actual Olivetti MF200lite)

      Did you try clean the print head ??

        Comment

        • mo0651
          Service Manager

          1,000+ Posts
          • Apr 2009
          • 1054
          #3
          Re: Konica Minolta C203/C253 (Actual Olivetti MF200lite)

          How old are some of the major parts??? Iu's re-chipped or new? Transfer roller? Belt?

            Comment

            • JSC
              Gimp

              500+ Posts
              • Dec 2006
              • 618
              #4
              Re: Konica Minolta C203/C253 (Actual Olivetti MF200lite)

              Originally posted by The-Peanut
              Hi

              I have had an awful time with a Olivetti MF201lite (Konica Minolta C203)

              We had the machine gun issue, in effect the machine had a blockage on the Magenta toner supply in the Conveyance tube. Yup! the whole machine has been stripped down to the frame just to reach the problem lol

              Anyhow we have a slight issue with Print Quality, please note that i have two machines in my workshop with the same problem
              It appears looking at the attached sample, to have darkened splodges in each of the colours, don't worry about the lines, its a fuser and transport belt issue, i have a few imaging units of each colour, that still show the same issue

              Anyone come across this before, thanks in advance

              Yea I have on in the field that does the same. Change the transfer belt and all will be good....
              The gene pool could use a little chlorine.

                Comment

                • The-Peanut
                  Trusted Tech
                  Site Contributor
                  100+ Posts
                  • Aug 2006
                  • 192
                  #5
                  Re: Konica Minolta C203/C253 (Actual Olivetti MF200lite)

                  I suppose I could have two faulty transfer belts, one is pretty new and the other is very old and has had a new fuse fitted in the past,

                  I have another MF201lite due in soon, I'll try the belt, in fact I'll try anything lol

                    Comment

                    Previous template Next
                    Working...