I'm am getting a black line down the right side when we run 12x18 it's about an 1/8" wide ?? It's is a C352 cleaned every thing inside.
Line
Collapse
X
-
Re: Line
So are you saying that you have eliminated the black IU as the problem? You really gave very little info. How many copies? How much life on black IU? Has it been chipped? Does it happen if you run the other colors as solid test prints? Is the problem on the fuser?The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking -
JonD
Re: Line
There was a cunk of hard toner in the waste end in the IU and it was all blocked up. Fished that out and it's back up and running.Comment
Comment