Konica Minolta Bizhub C220 Transfer Belt Unit replacement

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22936
    #16
    Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    Originally posted by Albonline
    looks like no charge on drum in that area. yellow only?
    I'll second this one. If the yellow drum unit is coated completely at the rear, that will be very difficult for the transfer belt to completely clean off. Try the yellow drum assy.

    If it was a transfer belt cleaning issue only the color would be brown (the color of transfer waste toner). =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

      Comment

      • allan
        RTFM!!

        5,000+ Posts
        • Apr 2010
        • 5459
        #17
        Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

        Originally posted by Don N.
        I'll second that. Doubt you would see any change in quality by doing the gradation adjust, although that's what the book says to do and if you know how, it's easy. At your level, skip it!
        I always do a demo page before and after and the change in the image is remarkable. Also look at the change you will get on the composite black from the gradation pages.

        Gradation adjustment if accessible from the admin menu.
        Whatever

          Comment

          Previous 1 2 template Next
          Working...