BizhubC250: how to see the toner's level thx!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sami42
    • May 2025

    #1

    BizhubC250: how to see the toner's level thx!

    hello, I would like to know if there is a function on the bizhub C250 which allows to know the level of toners ie the amount consumed and remaining (one for each color gauge BCMY?)
    thank you in advance!
  • cobiray
    Passing Duplication Xpert

    1,000+ Posts
    • Mar 2008
    • 1199

    #2
    If you have the machine networked, you can view an embedded web page by opening an internet browser and type in the I.P. address in the address bar. There should be an estimated toner remaining section that gives you a general estimate of toner left in the cartridge.
    the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
    Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
    Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

    Comment

    • ebm
      Trusted Tech

      100+ Posts
      • Apr 2007
      • 183

      #3
      If you press Utility/Counter button there should be a "Check Consumable Life" displayed on the touch screen. If it is not displayed in the Utility/Counter mode then check in the "Administrator" mode.

      Comment

      • sami42

        #4
        thanks fo yours answer! i gone try it!

        Comment

        • ni311
          Senior Tech

          Site Contributor
          500+ Posts
          • May 2008
          • 658

          #5
          The "Check Consumable Life" is showing only the life on imaging units, fusing unit and transfer belt, you won't see any toner level there. As cobiray said, the only way to check it is to open the web page of the machine with your browser. The later models, C203/253/353 have small icons that indicate the toner level, but unfortunately C250/252 have no easy way to check it.
          Konica Minolta Error Codes - Explanations and Solutions

          Comment

          • sami42

            #6
            thanx ni311, i think that i'll use a rudimentary method on a super sophisticated machine!
            I will remove the toner shaking, weigh ....
            thx!

            Comment

            Working...