My minolta copier EP 3000 very light copy. I would like to get programme code for this machine or adminstrator mode code. What can be the problem for this light copy. toner and develper new
-
Last edited by Guest; 06-02-2008, 02:16 PM. -
you need a tech -
Have you cleaned the optics? Check the dev bias connection.The Wizard
To the Pessimist the glass is half empty
To the Optimist the glass is half full
To the copier engineer...
The wrong glass has been supplied, it should be 50% smaller HahaComment
-
Tone up the DV and run F-8 again!!!!!!!!Comment
-
To get good advice, you would have to provide more info, like a meter count and history of if drum and developer have been changed. IF YOU ARE NOT A TECH, THIS IS OUT OF YOUR LEAGUE, CALL ONE.The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen HawkingComment
Comment