Konica 7055 error f36-2

[Guest]

Ive got error f36-2 on a Konica 7055 copier.

The thermisters, thermal fuses and lamps are ok so I thought it would be a reset job.

Ive tried dip sw 3-1 but I may not be entering the command properly.

Haven't got much info on Konica as I usually look after Ricoh kit.

I would appreciate help from anyone who is more familiar with these copiers.

Thanks guys. Tony.

[laserman06]

I personally do not work on that model, but I do work on other Konica models. I searched Konica's site and found a couple of things. One is the correct procedure to reset the fuser codes and the other is dealing with intermittent 36-02 codes. Hope this helps.

[laserman06]

OOPs, forgot to attach the files. So here they are.

[tonyadf]

Konica

Many thanks for the manual page, everything reset perfectly.


Tony.

[glauberstedile]

Konica 7022

Ive got error f36-2 on a Konica 7022 copier.

The thermisters, thermal fuses and lamps are ok so I don't kwon as do it.

At the others manufacturers have as reset this problem.

Haven't got much info on Konica as I usually look after Ricoh kit.

I would appreciate help from anyone who is more familiar with these copiers.

Thanks guys. Glauber.

[tonyadf]

konica reset

Konica 7055 reset. may be the same as yours

Tony

[redhotrob]

With your 7022, or any machine in this series, all you need to do is touch those darn temperature sensors on the heat roller for them to act up. When I did service those models, I always carried a set of the sensors in my trunk stock. It got to the point that I wouldn't want to change the heat roller or clean the sensors without having a spare in my car.

[glauberstedile]

Thanks

Thanks, That's ok.

[chejay127]

Re: Thanks

Thanks, That's ok.

Sir I am also having this kind of error code, i did try to reset those codes to zero then turn off the machine, when i power on the copier the error is gone and it will warm up for a few minutes but when I hit print it wont make a copy but display the same error code which is f36-2.. please help..