2014-01-14 17.15.39.jpgcan one of you great gurus give me some insight , its only the black that does this. much appreciated!
-
-
Re: Strange banding along the side
How about make,model ? -
Re: Strange banding along the side
I'm going to make some WAG's that this is a copy, not a print, and from the glass, not through the document feeder ... true?
If true, the document feeder height may be out of adjustment, letting the original float up above the surface of the glass. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Strange banding along the side
I will take a punt on it being a C451, with badly grounded K image unit.
Comment
-
Comment
-
Re: Strange banding along the side
You think? You're asking for help and you haven't even determined what model it is? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment