[Error Code] Problem Fiery IC 408 for Konica C6500

[chadson]

2014-02-27_093600.png

Hi guy

I have one problem need help please

I have reinstalled my Fiery


While running a few days, such issues appear

When i restart Fiery "FF" , At Copie dissapear "Controller"

Please help me.

thank you every one and mode su much

[chadson]

Re: Problem Fiery IC 408 for Konica C6500

please help me

[Synaux]

Re: Problem Fiery IC 408 for Konica C6500

please help me

First off:
To respond to one's own post with 18 hours in poor taste on just about any forum.

Second:
Give us some more clues.

[chadson]

Re: Problem Fiery IC 408 for Konica C6500

helppppppppppppppppp

i was creat a usb boot fiery software......but it not boot........

[silviux]

Re: Problem Fiery IC 408 for Konica C6500

helppppppppppppppppp

i was creat a usb boot fiery software......but it not boot........

Change hard disk

[costel fasola]

Re: Problem Fiery IC 408 for Konica C6500

Reinstall efi fiery sistem

[Albonline]

Re: Problem Fiery IC 408 for Konica C6500

do both of above ff means system not found on hdd if it wont start from jump drive you may need a new motherboard.

[chadson]

Re: Problem Fiery IC 408 for Konica C6500

[QUOTE=chadson;409407]2014-02-27_093600.png

so what about this failed

what can i do.....next.........i run a few day.....appear it.......can not print......but connect remote desktop good

please help

[Albonline]

Re: Problem Fiery IC 408 for Konica C6500

replace hdd, reload firey system or ghost a known good system onto a new hdd= fixed!

[chadson]

Re: Problem Fiery IC 408 for Konica C6500

replace hdd, reload firey system or ghost a known good system onto a new hdd= fixed!

i was replace hdd new, i install new.....what about ghost.....which ghost i can do?

[chadson]

Re: Problem Fiery IC 408 for Konica C6500

hi guy...

where can i get Fiery System software?

thank you every one