C280 With PC 207

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • big jase
    Service Manager

    Site Contributor
    100+ Posts
    • Jul 2008
    • 136
    #1

    C280 With PC 207

    Im getting J20-02 jams from tray3 , doesnt matter which size paper is in tray it feeds around 10-15 then jams , i have replaced the spring clutch, reaplaced all feed tyres , i have also replaced the registration clutch ,tray 2 feed clutch and the drive /feed moters on tray 3

    Please help driving me crazy!
    If at First you don't succeed remove all evidence of ever trying!
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22932
      #2
      Re: C280 With PC 207

      Have you cleaned with alcohol and oiled the one-way bearings. Every time I have the feed unit out, I make sure to do so, as a preventative. It's a very common failure, and does not require new parts. =^..^=
      Last edited by blackcat4866; 03-27-2014, 12:02 AM.
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • EarthKmTech
          Step aside, noob

          1,000+ Posts
          • May 2009
          • 2139
          #3
          Re: C280 With PC 207

          replaced all the tires hey...

          when you replaced the separation roller, did you reuse the existing torque limiter or replace it ?

          I've had this very head scratching issue caused by a failed sep roller torque limiter before.

          considering it and the 1 way bearings are half the price of the rollers $4 versus $8- just throw them away and replace them at the time of replacing the rollers, but its your decision at the end of the day what you do, this is what I do and it works for me.

            Comment

            • big jase
              Service Manager

              Site Contributor
              100+ Posts
              • Jul 2008
              • 136
              #4
              Re: C280 With PC 207

              Thanks blackcat will check the one way gears ,

              Earthtech. I replaced the full step roller assembly, as had same issue you said before
              If at First you don't succeed remove all evidence of ever trying!

                Comment

                Previous template Next
                Working...