KM 363 will not pull an IP address

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • wseyller
    replied
    Also believe it or not, in rare situations not everyone has a dhcp server. In those cases you have to do a manual config. I have run into a couple of these and the IT even said they don't have one.

    Sent from my DROID BIONIC using Tapatalk

    Leave a comment:


  • blackcat4866
    replied
    Re: KM 363 will not pull an IP address

    Any time I cannot get the MFP to connect, the next thing is to connect the laptop at the same connection. If it still doesn't connect, you can be sure its network related.

    I remember on one install, the customer ran his own network drops, and crimped them himself. Too bad there wasn't any particular pattern to the arrangement of the wires in the RJ45 connectors. It added 45 minutes to re-crimp 4 network drops. =^..^=

    Leave a comment:


  • Solotime
    replied
    Re: KM 363 will not pull an IP address

    Nevermind. Turned out to be a bad port on their switch.

    Leave a comment:


  • Solotime
    started a topic KM 363 will not pull an IP address

    KM 363 will not pull an IP address

    Is there a security setting that could cause this or are we looking at a dead NIC?
    Will not pull an IP address other than one way out of range and I can not ping the copier and it will not ping a known ip address on the network.
    Thanks
Working...