[Misc] shade(skew) in scaning to smb on c652

[juve]

hello,
I have encountered a problem that maybe someone can help me.I went on a c652 that when scaning for example to smb the result scan is coming out with with a scew and a shade at the top left margin(as you see it).but when make copies normally from radf this misallignment is not seen.attachment of the scan is here under.can somebody gives me a tip.

[Blizzoo]

Re: shade(skew) in scaning to smb on c652

I had once that on a different Bizhub,I made again the DADF adjustments and after was fine.

[Mr Spock]

Re: shade(skew) in scaning to smb on c652

Also there was a firmware update that helped. It did not eliminate it but did help.

[juve]

Re: shade(skew) in scaning to smb on c652

I had once that on a different Bizhub,I made again the DADF adjustments and after was fine.

you did again the DADF?and whats this?can you explain?maybe the radf initial settings?

[Blizzoo]

Re: shade(skew) in scaning to smb on c652

you did again the DADF?and whats this?can you explain?maybe the radf initial settings?

Yes,the RADF,like in the instalation manual,adjust skew feed etc...
Sorry for DADF thing,i work on many other brands and document feeders are named different.