DF-621 jamming bizhub 363

[CraigW]

Re: DF-621 jamming bizhub 363

Actuator = A3CFPP4VOO

Magnet = A3CFPP1700

[Don N.]

Re: DF-621 jamming bizhub 363

Actuator = A3CFPP4VOO

Magnet = A3CFPP1700

See my post on 66-02 jams for this feeder. The left cover (lid) is warping upward. When it reaches about 25mm or more from the original table to the underside of the cover, the paper empty flag is too high and the angled area no longer hits the feed tires shaft at it's bent spot. This makes it bounce and read another false page, then tried to feed against the black felt friction pads. Our shop fix is applying about 39 lbs of weight to the feeder lid for a week or two, then put it out in the field. So far they have not warped back up. Any lid 23~24mm is fine. 25+ you will get 66-02 jams after last page is fed.
Prove it by simply pressing down with medium pressure on the cover. It won't fail! I posted slo no video proving this fix. The magnet in the actuator is just a band aid.