Prep for storage.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Joseph.ARM
    Technician
    • Jun 2013
    • 36
    #1

    Prep for storage.

    Morning everyone,

    I just wanted to get some recommendations for storing a 1200p and c65hc. The printers will probably be stored for at least a year, the warehouse is not climate controlled (not my first choice but I don't sign my paycheck). I figured I would pull the toner bottles and replace the waste containers. Also wrap them in plastic. What do you guys think about the developer? Should I clean it out as well? If there is anything else please let me know.

    Thank you,
    Joseph
    Tags: None
    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009
      #2
      Re: Prep for storage.

      Don't know much about production MFPs, but for office equipment, I would also think about anything that has pressure applied to it...Fuser for example. Nothing like a big flat spot for fuser issues. These things come with all sorts of lockdown brackets for shipping, it might be worth the peace of mind to have a KM rep come out and prep them. I do know the biggest headache will be when you put them back together, our techs spend hours getting them leveled out and matched back up properly...just my 2 cents. Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22932
          #3
          Re: Prep for storage.

          Originally posted by emujo
          Don't know much about production MFPs, but for office equipment, I would also think about anything that has pressure applied to it...
          Same here. I would remove fixing pressure, drum cleaning blades, ... maybe even spacing out the registration rollers at the ends so they don't touch. Definitely use professional copier movers. No matter how well intentioned, your good buddy Jeb will end up busting something off unintentionally. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            Previous template Next
            Working...