We had a problem about update firmware bh215

[sangcom]

We had a problem about update firmware bizhub 215
The Power outages moment update firmware.
the machine show "Bios Mode"
how to will solve this problem?

Thank you

[ghost--o_o--]

Re: We had a problem about update firmware bh215

Connect machine to PC
Press key Utillity / Function and Power ON
Machine start and display * BIOS MODE * WAIT FOR FIRMWARE UPDATE.
Wait PC find new hardware (scanner driver). Required special driver. (I have not this)
Then can use normal flash utillity.

But I have no experience with this machine.

[sangcom]

Re: We had a problem about update firmware bh215

I understand that if I change mfp the machine is normally
But i need to fix this condition. Apart to changing MFP

Who have an experience with this symptoms

Thank you

[khin thu]

Re: We had a problem about update firmware bh215

We had a problem about update firmware bizhub 215
The Power outages moment update firmware.
the machine show "Bios Mode"
how to will solve this problem?

Thank you

Yy

[Synthohol]

Re: We had a problem about update firmware bh215

Yy

yes, why?