Bizhub 600 web advance

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • acsolutions
    Senior Tech

    500+ Posts
    • Jun 2010
    • 519
    #1

    [CQ] Bizhub 600 web advance

    Trying to adjust web advance for every copy, only strike for every 5 copies! any help would be great!
    Tags: None
    • havokprod
      Trusted Tech

      Site Contributor
      VIP Subscriber
      100+ Posts
      • Oct 2012
      • 159
      #2
      Re: Bizhub 600 web advance

      Reset the Web counter in Tech Rep... It will advance the web every copy. For a while anyways.

        Comment

        • acsolutions
          Senior Tech

          500+ Posts
          • Jun 2010
          • 519
          #3
          Re: Bizhub 600 web advance

          Originally posted by havokprod
          Reset the Web counter in Tech Rep... It will advance the web every copy. For a while anyways.
          Thanks, I have been fighting with this machine in one way or another for the last 6 months!!! last week I went to the call for toner dumping and I had replaced the toner recovery roller and today I got a call back for jamming! (The tab that sit on the recovery roller on the back is,I'm guessing is a bias connector)? the customer showed me examples of toner smeared on a page and I ran about 200 pages and it started double imaging and the leading edge had a build up! The toner does not smear, seems to be fixing, but is it cleaning? I had rebuild the fuser about a year ago so it has new UFR,LFR,Bearings,claws and a web and there is no adjustment for pressure and I checked the drum and saw no lines, and seemed to be cleaning! A few months back I had to put a new UFR, developer change and a drum blade (generic blade) in the machine due to a generic toner issue they were having. so what I plan to do is replace the drum blade with an OEM type and take out another fixing assembly to see if that fixes the problem, or is there bad toner again! After replacing the toner recovery roller this started to happen, but it's not dumping toner any longer? any suggestions would be awesome! Thanks

            Comment

            • emujo
              Field Supervisor

              2,500+ Posts
              • Jun 2009
              • 3009
              #4
              Re: Bizhub 600 web advance

              Many of our guys disconnect the power to the toner conveyance roller clutch. It will keep the roller turning all the time. Emujo
              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                Comment

                • acsolutions
                  Senior Tech

                  500+ Posts
                  • Jun 2010
                  • 519
                  #5
                  Re: Bizhub 600 web advance

                  Originally posted by emujo
                  Many of our guys disconnect the power to the toner conveyance roller clutch. It will keep the roller turning all the time. Emujo
                  Yes, I set the dip switches so it will drive all the time! I'm just trying to figure out why it's double imaging and leaving streaks of toner on the pages. You can even see it if you run 20 to 30 sheet if you look at the leading edge!

                    Comment

                    Previous template Next
                    Working...