Minolta CF 910 error 60

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Josh Moody
    Moodyman
    • May 2008
    • 24

    #1

    Minolta CF 910 error 60

    We had a machine dropped off. on pwr up it gives error code 60. any takers on what this code is
  • 10871087
    Service Manager

    1,000+ Posts
    • Jan 2005
    • 1143

    #2
    Originally posted by Josh Moody
    We had a machine dropped off. on pwr up it gives error code 60. any takers on what this code is
    if it is a C0060, here is what the book says:
    C0060

    Fusing Motor M17’s failure to turn

    The M17 Lock signal is not detected for a continuous 5 sec. period or more while M17 remains energized.





    Comment

    • Rudi
      Technician

      250+ Posts
      • Jun 2007
      • 251

      #3
      Wow You Bring Back Memories WIth That Mach I Have Never Seen A Mach With Better Copy Quality Than The Cf 900/910 And 9001 Very Expensive To Run But A Real Master In The Art As For The Code The Fuser Drive Has Quite A Lot Of Things Against It Like Rollers And Blades Make Sure One Of Your Cleaning Blades Are Not Flipped Or Stuck And Check To See That Your Fuser Oil IS Sufficient.

      Comment

      Working...