Repetitive Defects Guage (Konica/Olivetti)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • D Colour
    Trusted Tech

    Site Contributor
    100+ Posts
    • Oct 2008
    • 213
    #1

    [Misc] Repetitive Defects Guage (Konica/Olivetti)

    Hi all

    Just wondering if anyone has such a thing for the Konica/Olivetti colour machines. Namely the Bizhub C224/284/364/454/554 (or Olivetti equivalent).

    Its the repetitive defects gauge which helps you determine which item may giving you a problem. Kyocera seem to have such a thing, but i cant find anything similar in the Konica manuals.

    Kyocera sample below.

    Repetitive defects.jpg

    Do they not have such a thing? Or am I blind!?

    Thanks


    James
    Everything that has a beginning, has an end.....
    Tags: None
    • CompyTech
      Super Tech

      500+ Posts
      • Feb 2011
      • 706
      #2
      Re: Repetitive Defects Guage (Konica/Olivetti)

      Originally posted by D Colour
      Hi all

      Just wondering if anyone has such a thing for the Konica/Olivetti colour machines. Namely the Bizhub C224/284/364/454/554 (or Olivetti equivalent).

      Its the repetitive defects gauge which helps you determine which item may giving you a problem. Kyocera seem to have such a thing, but i cant find anything similar in the Konica manuals.

      Kyocera sample below.

      [ATTACH=CONFIG]27095[/ATTACH]

      Do they not have such a thing? Or am I blind!?

      Thanks


      James
      Not sure about that but, Konica has a Troubleshooting guide that's written out a lot better IMO. Go to chapter 15 in the c284 series service manual, under K. Troubleshooting.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22997
          #3
          Re: Repetitive Defects Guage (Konica/Olivetti)

          I know a few ...

          95.7mm: drum
          111.5mm: fuser
          ~1016mm: primary transfer

          =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • D Colour
              Trusted Tech

              Site Contributor
              100+ Posts
              • Oct 2008
              • 213
              #4
              Re: Repetitive Defects Guage (Konica/Olivetti)

              Thanks CompyTech, the Konica troubleshooting section is extremely detailed! But sometimes the simplest of ideas are the most useful.

              Blackcat, super stuff, thank you, ill make a note of those!
              Everything that has a beginning, has an end.....

                Comment

                Previous template Next
                Working...