bizhub (C280) List Output "USB save"

[John Kaufmann]

The "List Output" section of the service menu (for Machine Management List, Adjustment List and Parameter List) has three output options: 1-sided print, 2-sided print, and "USB save". Selecting either of the print options outputs the print immediately, but selecting "USB save" does not seem to write to a USB stick in the service port. Unfortunately, the Service Manual does not address the USB output option at all. What is needed to make it work?

[EarthKmTech]

Re: bizhub (C280) List Output "USB save"

you dont need to put the stick in the service port, I use the port on the side near the panel all the time.


The stick does have to be formatted correctly to work, and I always insert it before going into service mode and wait for it to be recognised first. Thats what I do and it always works for me.

[John Kaufmann]

Re: bizhub (C280) List Output "USB save"

you dont need to put the stick in the service port, I use the port on the side near the panel all the time.

Thanks - I will give that a try.

The stick does have to be formatted correctly to work

It's a 4GB stick formatted FAT32. That should be good, correct?