Buzhub 501 Registration

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • servisource
    Junior Member
    • Jun 2011
    • 7
    #1

    Buzhub 501 Registration


    Registration off 2/16 inch from top to bottom
    of page, (crooked). Happens on all trays and
    when your copying, printing or in service mode.
    Installed new reg. assembly and removed and
    inspected scanner unit.

    Appreciate any help.
    Thanks
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22960
      #2
      Re: Buzhub 501 Registration

      So have you determined yet whether it's a paper skew or an optical skew? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • servisource
          Junior Member
          • Jun 2011
          • 7
          #3
          Re: Buzhub 501 Registration

          Originally posted by blackcat4866
          So have you determined yet whether it's a paper skew or an optical skew? =^..^=
          Not a paper skew, paper straight at reg roller.
          Not optic's, happens when printing and service mode.
          Thinking scanner adjustment or something....

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22960
              #4
              Re: Buzhub 501 Registration

              Originally posted by servisource
              Not a paper skew, paper straight at reg roller.
              Not optic's, happens when printing and service mode.
              Thinking scanner adjustment or something....
              I'm going to disagree with your conclusion. Prints and services reports skewing indicated a paper skew or laser unit skew adjustment, not scanner. How could the scanner affect a print? It just can't.

              Another way to confirm a paper skew is to create a line in your image, and measure from the line to the edge of the paper at the lead and at the trail. There are several non-destructive ways to create a line:
              1) you can put a piece of tape on the primary charge unit
              2) you can put a piece of tape on the transfer separation assembly
              3) you can block the optical path from the laser with a piece of tape.

              I think that is what I would do next.

              Before you start fixing, it's a good idea to confirm exactly what you're fixing. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • servisource
                  Junior Member
                  • Jun 2011
                  • 7
                  #5
                  Re: Buzhub 501 Registration

                  Originally posted by blackcat4866
                  I'm going to disagree with your conclusion. Prints and services reports skewing indicated a paper skew or laser unit skew adjustment, not scanner. How could the scanner affect a print? It just can't.

                  Another way to confirm a paper skew is to create a line in your image, and measure from the line to the edge of the paper at the lead and at the trail. There are several non-destructive ways to create a line:
                  1) you can put a piece of tape on the primary charge unit
                  2) you can put a piece of tape on the transfer separation assembly
                  3) you can block the optical path from the laser with a piece of tape.

                  I think that is what I would do next.

                  Before you start fixing, it's a good idea to confirm exactly what you're fixing. =^..^=
                  Thanks for reply Cat, ya I meant laser unit, but KB calls it "The writing unit" ?
                  Solution: The laser unit is mounted on metal plate which is adjustable on one side. Just moved it up a hair and that did it..
                  We buy a lot of machines from leasing companies that bang the sh*t out of them.

                  Again thanks.

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22960
                      #6
                      Re: Buzhub 501 Registration

                      Congratulations on your success. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        Previous template Next
                        Working...