konica minolta d351 install image unit

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • feeder_supply
    only problems... no?
    • Mar 2009
    • 9

    #16
    Originally posted by javier4065
    thanks mr. deep where is the 38 kilo ohm resistor? I need solve this machine.

    are you in lima,?.. Peru, then buy the fuse to minolta di -350/250/351/251/200 EN CUALQUIER TIENDA, BUSCA A COPIER MARKET, LA FERIA, AND PIDELO COMO FUSIBLE

    Comment

    • feeder_supply
      only problems... no?
      • Mar 2009
      • 9

      #17
      Originally posted by feeder_supply
      are you in lima,?.. Peru, then buy the fuse to minolta di -350/250/351/251/200 en cualquier tienda, busca a copier market, la feria, and pidelo como fusible

      Comment

      • goldencup
        Trusted Tech

        250+ Posts
        • Nov 2008
        • 366

        #18
        Re: konica minolta d351 install image unit

        Hi,

        As i read this old post i would like to ask about this di-351. I have a case here that the indication in the screen is not "Install" or "Replace" Imaging Unit, mine here indicates "Change Imaging Unit" I have no fuse available yet so what i did is get another imaging unit from a different good machine. But still the indication is not removed. Any other suggestions? (adjustments maybe?) Thank you very much.

        by the way if i replace the fuse, do i still have to replace the resistor?
        Last edited by goldencup; 10-01-2012, 08:16 AM. Reason: additional question

        Comment

        • Marnas

          #19
          Re: konica minolta d351 install image unit

          In regard to the Minolta Di351 error message
          *The imaging unit needs to be changed. call your technical representative*

          Comment

          Working...