Hi,
I have a Bizhub C250 that is printing thin cyan lines across the whole print area. In the pics, the lines almost appear as a haze, but my camera will not capture them as they appear to my eye. The yellow stripe does, however, give a somewhat reasonable representation. The prob is also intermittent but happens with some frequency.
I have replaced the IU & transfer belt. I also cleaned the laser windows.
Any advice will be greatly appreciated. Thanks in advance.
I have a Bizhub C250 that is printing thin cyan lines across the whole print area. In the pics, the lines almost appear as a haze, but my camera will not capture them as they appear to my eye. The yellow stripe does, however, give a somewhat reasonable representation. The prob is also intermittent but happens with some frequency.
I have replaced the IU & transfer belt. I also cleaned the laser windows.
Any advice will be greatly appreciated. Thanks in advance.
Comment