BH C10 copy output.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • abbasly.tech
    Junior Member

    Site Contributor
    • Jul 2013
    • 8

    [CQ] BH C10 copy output.

    Hello there,

    Had this problem with my Konica Minolta BH C10, when copying duplex, the paper will be folded in the middle..... Had clean the solenoid,all 3 on the right side of the cover .... but the problem still coming back.....

    Please help....

    Attach a copy of the folded paper....

    Thanks A Million....
    Attached Files
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3313

    #2
    Re: BH C10 copy output.

    The typical effect of a sticky patch on the solenoid of the clutch.

    (Did I say I HATE this machine.....?)

    Hans
    Attached Files
    Last edited by Hansoon; 03-25-2015, 12:57 PM.
    " Sent from my Intel 80286 using MS-DOS 2.0 "

    Comment

    • minimerlin
      Senior Tech

      Site Contributor
      500+ Posts
      • Nov 2007
      • 851

      #3
      Re: BH C10 copy output.

      Originally posted by Hansoon
      The typical effect of a sticky patch on the solenoid of the clutch.

      (Did I say I HATE this machine.....?)

      Hans
      I agree...all C10`s should have been shot at birth..a total piece of utter crap!
      Please do not PM me without asking first.

      Comment

      • allan
        RTFM!!

        5,000+ Posts
        • Apr 2010
        • 5445

        #4
        Re: BH C10 copy output.

        H code generator lazy and funway to destroy or fix it is to keep on spraying the solenoid with contact cleaner until the patch washes of without striping the machine.
        Whatever

        Comment

        • abbasly.tech
          Junior Member

          Site Contributor
          • Jul 2013
          • 8

          #5
          Re: BH C10 copy output.

          Thanks.....

          Comment

          Working...