service manuals , firmware , a story of a newbie , request , and other things

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jakani
    Trusted Tech

    100+ Posts
    • Dec 2014
    • 147
    #1

    service manuals , firmware , a story of a newbie , request , and other things



    this one is for olivety brand (like konica minolta and develop same firmware and program)
    ftp://85.182.248.68/

    ftp://195.91.159.71/

    this one you will find some Russian in it
    ftp://dhcp-29-254-208-178.metronv.ru...%CA%C0/%D1224/

    ftp://212.59.5.238/


    i solved my first problem and other problems thanks to this forum and thanks to the experienced technicians that gave some of their precious time to answer stupid questions of a newbie with no training at all , thanks for everything

    other thing before leaving if anybody here have some useful stuff of ineo + 454e or ineo 454e or anything on this plotter aficio mp w2401 I appreciate it

    here is my email : jakani@yandex.com
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22601
      #2
      Re: service manuals , firmware , a story of a newbie , request , and other things

      That's a good story. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • emujo
          Field Supervisor

          2,500+ Posts
          • Jun 2009
          • 3009
          #3
          Re: service manuals , firmware , a story of a newbie , request , and other things

          Saw your post and had to comment since you mentioned me in particular...As long as you include the basic premise "this forum is mostly for trained techs with unusual problems and questions" you will find that 99% of the advice given is very useful, and I include some of my own responses that fall into the 1% that is not helpful. Firmware, manuals, and passwords are something that all trained techs have access to (at least with KM), and can be, in the least, questionable, and at most, quite dangerous, to give out at the drop of a hat. So if I give you a suggestion to try like " enter service mode and set soft switch 172 to hex 70", then I expect you know how to get into service mode to try my suggestion. I would hate to to be the guy who showed you how to reset a fuser code and later found out you reset the code 4 times in a row just before the MFP caught fire and burned the place of business to the ground. Or the one who showed you how to get past the admin password to by pass the color codes so you could make unrestricted color copies and so on...So I don't know if you were slamming me with your post or not (either way is fine) but this is my reasoning. Emujo
          If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

            Comment

            • Tonerbomb
              AutoMajical Resolutionist

              Site Contributor
              2,500+ Posts
              • Feb 2005
              • 2589
              #4
              Re: service manuals , firmware , a story of a newbie , request , and other things

              Originally posted by emujo
              Saw your post and had to comment since you mentioned me in particular...As long as you include the basic premise "this forum is mostly for trained techs with unusual problems and questions" you will find that 99% of the advice given is very useful, and I include some of my own responses that fall into the 1% that is not helpful. Firmware, manuals, and passwords are something that all trained techs have access to (at least with KM), and can be, in the least, questionable, and at most, quite dangerous, to give out at the drop of a hat. So if I give you a suggestion to try like " enter service mode and set soft switch 172 to hex 70", then I expect you know how to get into service mode to try my suggestion. I would hate to to be the guy who showed you how to reset a fuser code and later found out you reset the code 4 times in a row just before the MFP caught fire and burned the place of business to the ground. Or the one who showed you how to get past the admin password to by pass the color codes so you could make unrestricted color copies and so on...So I don't know if you were slamming me with your post or not (either way is fine) but this is my reasoning. Emujo
              Nice play emujo, the hex card!!!!!!! there aren't that many of us that know what that is let along know how to do hex math..........................
              Mystic Crystal Revelations

                Comment

                • jakani
                  Trusted Tech

                  100+ Posts
                  • Dec 2014
                  • 147
                  #5
                  Re: service manuals , firmware , a story of a newbie , request , and other things

                  Originally posted by emujo
                  but this is my reasoning. Emujo
                  and it's good and enough for me , this make you more responsible for what you're posting ,

                  and for the moment i don't want to burn any place ... maybe in the future )

                  i'm an It gay in a small company my problem was that i didn't have any training (for many reasons) and found my self in front of 11 ineo 454 machines ,so this forum was and still watching my back

                    Comment

                    Previous template Next
                    Working...