Updated firmware. Formatted HDD. Updated movie firmware. Machine will not copy or print meter count or configuration page. Scanner moves but drive motors do not turn. Displays "stopped printing" under job list. Drive motors turn when in service mode when doing a stabilization. No codes displayed. Any idea's?
-
-
Re: C452 will not copy
Sounds like one of the consumables has reached end of life. Press utility/counter and check consumable life.
If you know how you can go into service mode and allow the machine to operate after end of life has been reached.
Hope this helps -
Re: C452 will not copy
I'm sure I'm missing something....It just hasn't clicked yet. I've set the bit's 51/55.?Comment
-
Re: C452 will not copy
Up and running! Thanks for leading me back into the light!Comment
-
Re: C452 will not copy
machines that have pplm mod when the units reach end of life they just quit printing. no warning message. if no stop is turned on they keep going. follow directions exactly.Comment
They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
Comment