c754 jam code 32

[Kenny]

Hi we have a few 754 with finishers , that are coming up with Jam code 32 ?

Has anyone seen this before and any ideas how to fix it ?>

Thanks

Kenny

[JSC]

Re: c754 jam code 32

Hi we have a few 754 with finishers , that are coming up with Jam code 32 ?

Has anyone seen this before and any ideas how to fix it ?>

Thanks

Kenny

Is that with the FS535?

[Kenny]

Re: c754 jam code 32

Yes a FS535

Regards

David

[JSC]

Re: c754 jam code 32

Yea I have a couple that jam, show J32 on the display but the operator can't find it. On arrival paper is stuck in-between relay rollers in the finisher, but very difficult for the user to see or clear. once cleared the machine runs fine but worryingly there is no jam logged in the jam count.

I have updated firmware, changed finisher control board all with no joy.... nothing known about it by Konica Minolta as yet..

Net time I get one im taking pictures, and printing off data sheets to send off to Konica Minolta.

[Kenny]

Re: c754 jam code 32

Thanks JSC

Exactly as you described ! If you could let me know your findings id be most grateful, I will do the same !

Kind regards


Kenny

[JSC]

Re: c754 jam code 32

Thanks JSC

Exactly as you described ! If you could let me know your findings id be most grateful, I will do the same !

Kind regards


Kenny

Will do.

Good luck out there!

[Kenny]

Re: c754 jam code 32

you too buddy

[Kenny]

Re: c754 jam code 32

Anyone else experienced this ?

[hotfuser]

Re: c754 jam code 32

Anyone else experienced this ?

if this is the jam in where the paper gets stuck in the finisher there is a modified shaft that is longer with a turning knob on the end.

I have enclosed the bulletins.

[srslyartyg]

Re: c754 jam code 32

This sounds exactly like what I need to fix a few machines that are repeat offenders. Thanks for the info, guys!


Has anyone completed the install with the revised bulletin/parts?