The feed tires on the current TA line suck. What are some substitutions for the tires on TA5500 5501, and the color units? Looking for something that lasts longer than oem.
-
I've proved mathematics wrong. 1 + 1 doesn't always equal 2.........
Especially when it comes to sex
-
Re: Task Alpha feed tires
We've been using Konica Minolta feed tyres for a while now from the TA-3050ci up to the TA-8000i. We also use it on the smaller mfp's like the KM-1135's.
The Part Numbers are
Roller: A00J563600
Pickup:A5C1562200 -
Re: Task Alpha feed tires
Have a look at this..
http://www.copytechnet.com/forums/ky...d-rollers.htmlEverything that has a beginning, has an end.....Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Task Alpha feed tires
Im not a KM dealer just Kyocera. Where is a good source to buy these rollers?Comment
Comment