Tray

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Valintine
    Trusted Tech

    100+ Posts
    • Jan 2012
    • 147
    #1

    Tray

    Hello

    I am a Toshiba tech mainly. One of my sales people sold a Kyocera TASKalfa 6500i that we received as a trade. It looks like it originally had a finisher attached. Unfortunately it does not have the finisher. I am looking to buy an exit tray for the machine. Is there anyone that might know of a part number or where I might buy one of these.

    Thank you in advance for any help.
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22973
      #2
      Re: Tray

      It uses (2) of the Copy Tray (D).
      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • blsquires
          Trusted Tech

          Site Contributor
          250+ Posts
          • Nov 2008
          • 342
          #3
          Re: Tray

          the good news is kyocera do sell an exit tray for this model .we have bought them in the past but i cant remember the part number or find it in the parts manual.

            Comment

            • blsquires
              Trusted Tech

              Site Contributor
              250+ Posts
              • Nov 2008
              • 342
              #4
              Re: Tray

              sorry blackcat in-between looking at the question then looking for the part number you had already answered his question .

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22973
                  #5
                  Re: Tray

                  I know there must be a supply number 1702.... something something, but my release bulletin is out in the car. Ok I confess, I'm lazy. =^..^=

                  Here it is: 1902LF0UN1
                  On some of the earlier Alphard bulletins forgot to include the exit tray.

                  Like this: Amazon.com: Kyocera Copy Tray (B) x 2 Unit, 1902LF0UN1: Computers & Accessories

                  Apparently Copy Tray (D) and Copy Tray (B) are interchangeable, depending on where you look, they both use the same supply number. =^..^=
                  Last edited by blackcat4866; 02-09-2016, 12:41 AM.
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    Previous template Next
                    Working...