Kyocera Parts Counters

[copiman]

I have been trying to find out how to tell the number of copies/prints that are on consumable parts such as Drums, Devs, Transfer Belts, fusers, etc...

The only thing I can find is line 50 on the status page. Is there any other methods to find these counts? I am fighting with very vague history information if any at all and would like to be able to see where these parts are in their cycle when I visit the machines.

[tmaged]

Re: Kyocera Parts Counters

They are all listed when you print off the Maint pages in U000. 110, 127, 158, 167, 251 & 901

[copiman]

Re: Kyocera Parts Counters

Thanks. I will look at the print outs again. Could not find them but I may have over looked them.

[Service@PRT]

Re: Kyocera Parts Counters

hi guys,

Im new to kyocera machines any idea on how to get into SM mode on it. thank you.

[banginbishop]

Re: Kyocera Parts Counters

hi guys,

Im new to kyocera machines any idea on how to get into SM mode on it. thank you.

open the front door 10871087 there is another way but i cant remember the left sided button to press

[copier parts n.ireland]

Re: Kyocera Parts Counters

1087 1087 type in quicky, print maintenances reports,sim 118 for drums sim 930 for develepers, sim251 etc depending on which utax/kyocera model.

sim 001 to exit service mode and back to ready to copy