tmaged
Owner/Service Manager
Last Activity: 1 day ago
Joined: 10-22-2008
Location: Center of my Universe
-
The two thinner ones in the top center of the guide. They are there to put a buckle in transparencies since the sensor would never see clear sheets going... -
May not help, but I remove the two mylars on the upper entrance guide to the finisher. They cause issues in the summer when paper is damp and has much...Leave a comment:
-
The was a change to the spring (Bulletin N116) for putting too much pressure causing double feeding. That said, the made a really good ADF much worse,...Leave a comment:
-
I ended up replacing the black guide, since I tried repairing the gears first, and that didn't work. The black guide wouldn't be bad except for that spring....Leave a comment:
-
I'm pretty sure you'll still need to load firmware as well, since some of it resides on the SSD.Leave a comment:
-
Looks like it needs a primary belt at minimum. It's probably no longer available and not worth it, if it is.Leave a comment:
-
You have to format the hooked up to a PC, deleting the partitions. Formatting it in the machine will not work, as it will not remove all the program info...Leave a comment:
-
I reached out to the hotline and there is no documentation on disassembly/assembly for these. If anyone has any, it would be greatly appreciated.Leave a comment:
-
Leave a comment:
-
I just got those numbers from my SSE and ordered them all yesterday. I'll update my findings as well.Leave a comment:
-
I just did a 308ci today. You have to follow QA I155. A little advice though, it doesn't tell you that you need to order 302R431600 SHEET TENSION when...Leave a comment:
-
Do you have any more info ? This part doesn't come up when you search the parts manual of the P6230/P6235....Leave a comment:
-
I have a P6235 doing the same thing. Mine is both black and yellow. I have reached out to our SSE about it. Mine had a couple of broken gears due to my...Last edited by tmaged; 4 weeks ago.Leave a comment:
No activity results to display
Leave a comment: