Hi, has anyone had the opportunity to order this harness for the fan. From relay all the way to the fan. I am a bit lost what part number it is. It connects to YC8 connector on Relay board and it is is a real b*** to get out and someone lucky before me and me inclusive pulled the wires after several attepts to pull the connector with combination of super thin tweezers and levering with narrow flat screwdriver. Almost thinking I'll be better off by solder in hard wiring new 2 pin connector from a old clutch or something and have it just hanging on top of relay board.
-
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: TA8000i Duplex Unit Fan Motor harness (DUFM)
Comment
-
Re: TA8000i Duplex Unit Fan Motor harness (DUFM)
That will do the trick. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment