[Dead] Kyocera taskalfa 3050ci firmware error f000

[Azharuddin]

Hi ,

In this Kyocera model the actual problem is c0800 for that purpose I changed the main PWB And then tried to update the firmware. Machine hangs as f040 .
Then I put the old PWB and tried to boot up normal it hangs as f000
Help us guys.
Before machine working with this (0800) error now not at all working.
Thanks in advance...

Sent from my XT1562 using Tapatalk

[DarrylTech]

Re: Kyocera taskalfa 3050ci firmware error f000

Had the same issue with a Taskalfa 3500i, replaced the CODE DIMM and it worked.

[wragsdale]

Re: Kyocera taskalfa 3050ci firmware error f000

Put the new main PWB back in and double check all of your connectors and harnesses. Were you sure to replace the EEPROM as well?

edit: Did not realize this was a necro'd post.

[Azharuddin]

Re: Kyocera taskalfa 3050ci firmware error f000

Thanks guys,
Problem with EEPROM and ribbon cable between engine and main PWB.


Sent from my XT1562 using Tapatalk