MK-460

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zoraldinho
    teacher-guide-expert-guru

    Site Contributor
    2,500+ Posts
    • Mar 2008
    • 4999
    #1

    MK-460

    Hi


    i have on stock MK-460 for Copystar and UTAX.
    Can somebody confirm that fits in Kyocera TASKalfa 180.Part number is the same.
    I got dark prints with new one.I suppose that the defect is on the drum.

    Thanks!
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22927
      #2
      Re: MK-460

      I'll confirm that. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • copygirl
          Technician

          50+ Posts
          • Apr 2008
          • 75
          #3
          Re: MK-460

          Yep. Part#1702kh0vn0
          Ginger

            Comment

            • copier parts n.ireland
              Technician
              • Nov 2016
              • 41
              #4
              Re: MK-460

              ive had dark prints quite a few times on new drums,everytime so far it has been the grid charger assembley ,we used to have problems when drums were
              stored in a cold environment.

                Comment

                Previous template Next
                Working...